Skip to content
Log in

Assign B2Brouter as your PA (DGFiP)

How to sign the mandate to designate B2Brouter as your Plateforme Agréée.

When you assign B2Brouter as your Plateforme Agréée (PA), your company is registered in the PPF Annuaire and on Peppol, the international electronic document exchange network. From then on:

  • You receive electronic invoices from your suppliers.
  • We send the DGFiP the statuses of the invoices you receive.
  • We issue your electronic invoices and report them to the DGFiP when you are required to, or earlier if you choose.

To assign us as your PA, the company's legal representative must sign a mandate. The process is done from ⚙ Account settings → e-Invoicing and e-Reporting France, in the main account (the SIREN one).

The mandate is a formal agreement in which you designate your PA. It is a requirement of French regulations, not something specific to B2Brouter: every plateforme agréée needs the signed mandate to register a company in the Annuaire.

It contains:

  • Your company's details: company name, address and SIREN.
  • B2Brouter's details as the new PA.
  • The effective date: from when B2Brouter is your PA.
  • The electronic invoicing addresses it covers.
  • Where applicable, the previous platform.
  • The mandate number, the date and the legal representative's signature.

What you authorise and what we publish. The mandate authorises us to manage your SIREN's electronic invoicing addresses, current and future. Authorising us does not mean we publish all of them: in the Annuaire we only publish your main address and those of the organisational units you create in B2Brouter.

Why we verify identity. The regulations require every platform to check that whoever designates the PA is one of the company's legal representatives. This way, nobody can designate a platform on your company's behalf without your consent.

Why two-factor authentication is required. The DGFiP also requires you to have two-factor authentication enabled to access the platform. That is why we ask for the code to sign the mandate. If you do not have it enabled, you enable it during the same process.

Once the mandate is signed, every user of the account must log in with two-factor authentication. If someone does not have it, we ask them to set it up when they log in, before they can continue, and they cannot turn it off while the account requires it. API access does not change.

How long we keep it. We keep the mandate while it is in force and for three more years after it stops having effect, because the tax authority may ask us for it. You can download it at any time.

In ⚙ Account settings → e-Invoicing and e-Reporting France, click Designate B2Brouter as PA. The process has three steps.

  1. Company size at 1 January 2025: large company, ETI, PME or micro-enterprise. We suggest the one recorded by the INSEE; confirm or correct it.

  2. Tick My company is part of an assujetti unique if your company is part of a TVA group.

  3. If you are a PME or a micro-enterprise and you are not part of an assujetti unique, you are not required to issue or report until 1 September 2027. Choose whether you want to start earlier:

    • Yes, from now: you issue and report from day one. Recommended
    • No, from 01/09/2027: until then, you only receive invoices. You can activate the tax report earlier whenever you want.
  4. Fill in the e-reporting details:

    • TVA regime: determines how often tax reports are sent to the DGFiP.
    • Operation type: services, goods or mixed. It is the default value; you can change it on each invoice.
    • Self-assessed TVA rate (%): applies to intra-EU purchases and to purchases of services from outside the EU that are reported in e-reporting, when the invoice doesn't carry its own tax rate.
    • Declarant email: needed for the tax reports of cross-border and simplified invoices.
  5. In Addresses we will manage we explain which addresses the mandate covers. You do not have to choose any: we will only publish in the Annuaire your main address and those of the organisational units you have already created or create in the future.

    If you already used B2Brouter as your PA before signing the mandate
    Signing the mandate does not change the addresses you already have published in the Annuaire: they stay as they are.

  6. If your company already has another PA, you will see it in this step. When you sign the mandate, we start the PA change, and until the effective date your current platform remains your PA. See Change PA.

    If you want to keep your main address on your current platform
    If you only want to bring your establishments' addresses to B2Brouter and leave the SIREN where it is, open a support ticket before signing the mandate.

  7. Click Continue.

  1. Choose the legal representative who will sign the mandate. The list comes from the Registre national des entreprises (INPI).

    If we cannot find the representative in the INPI
    If we cannot query the INPI, your company is not listed there, or no representative who can sign the mandate appears, you will see the option to enter their first name, last name and role. In that case, our team will have to review the representative's details before activating the service.

  2. Indicate whether it is you:

    • Yes, it is me: verify your identity. You will need an official document. If you have already been verified, this step does not appear.

    • No, it is another person: enter their email address and we send them an invitation. That person will verify their identity and sign the mandate from their own user. Meanwhile, you will see the status of the invitation and can resend it.

      If the representative cannot complete the process online
      Under How do you want the representative to sign the document?, choose Manually. At step 3, download the mandate, have the representative sign it and upload it together with a Kbis extract less than 3 months old and both sides of the representative's identity document. If your company does not have a Kbis, attach an official document showing the SIREN, the company name and the legal representative. This option takes longer, because our team has to review the documents before activating the service. Until then, the status will be Review in progress.

  1. Download the mandate and read it before signing.
  2. Tick I accept the mandate and I have read and accept the Peppol service agreement.
  3. Click Sign the mandate, enter the 6-digit code from your authenticator app and click Sign.

If the representative signs by hand, this step asks for the signed mandate and the company's registration proof with the representative's identity document. Upload them, tick the Peppol service agreement and click Send. You also need two-factor authentication enabled.

If the Peppol service agreement box is disabled
The PPF is in a maintenance window. Try again when it ends.

If you signed at step 3, you will see «Mandate signed. We will publish your company in the Annuaire and activate Peppol in a few minutes.». If you sent the mandate signed by hand, or entered the representative manually, you will see «Application submitted. We will publish your company in the Annuaire once we validate the mandate and proof of identity.».

Then, in the e-Invoicing and e-Reporting France section you will see a summary of your designation:

  • Annuaire: the status of your address.
  • Reception and statuses of received invoices: whether you can already receive invoices and their statuses.
  • e-Invoicing and e-Reporting: whether it is active or from when it will be activated. This shows at a glance whether you only receive invoices or also issue and report. If you only receive invoices, the Activate now button there starts issuing and reporting. If you already report, the button there is Deactivate.
  • Mandate: who signed it and when. You can download it from here.
  • Effective date: the date from which the mandate takes effect and we start the activation.

The tax report configuration and the advanced options are explained in Tax report: activation and configuration.

Publication in the PPF Annuaire is not immediate: it goes out with the DGFiP's nightly batch and is live the next morning. This is their infrastructure's rhythm, not a B2Brouter delay. Until then you will not be able to issue or receive DGFiP invoices.

StatusWhat it means
Activation in progressWe are registering your address in the Annuaire. It will be active from the next day.
ActivatedB2Brouter is your PA.
Plateforme Agréée change in progressYou are coming from another PA and the change is being processed. Until the effective date, your previous platform remains your PA.
Review in progressYou signed the mandate by hand or entered the representative manually, and our team is reviewing the details. Until we finish, we do not publish the company in the Annuaire.
RejectedWe rejected the mandate or the proof of identity. We send the reason by email to the account owner. Go back to e-Invoicing and e-Reporting France: step 3 asks you to upload again only the rejected document. Then the status goes back to Review in progress.

On Peppol, we create your identifier with scheme 0225. If the account already had a Peppol identifier, it is replaced by this one.

What is scheme 0225? In Peppol, each identifier carries a scheme code indicating what type it is. Scheme 0225 is the one that identifies French companies on the Peppol network, based on their SIREN or SIRET. Other schemes identify other types of identifier: for example, 0002 for SIREN or 0009 for SIRET.

Check that the registration is published on the Peppol network

Section titled “Check that the registration is published on the Peppol network”

Once B2Brouter is assigned as PA, you can check how the Peppol network registration is progressing in ⚙ Account settings → Peppol. Each indicator can show one of these states: Not published, In progress or Published.

IndicatorWhat it means
SMLThe global registration on Peppol. Your company is making itself known on the Peppol network.
SMPThe metadata service (in B2Brouter this follows the SML). The link needed for invoices to reach you correctly is being set up.
Peppol DirectoryPublic listing of companies discoverable on Peppol.

When SML and SMP are Published, you can already receive invoices via Peppol. The Peppol Directory status does not affect this — it only determines whether you appear in the public search listing.

Organisational units are covered by the main account's mandate and inherit its tax report, so no new mandate is needed. When you create one, we publish its address in the Annuaire with B2Brouter as PA. The address becomes active the next day. Until then, the unit shows the status Activation in progress.

To learn how each unit is identified and which address it publishes, see Your company structure in B2Brouter.

If the unit's address is already in the Annuaire with another PA, we will ask for your confirmation before starting the PA change for that address. See Change PA.

ErrorWhat to do
PPF error 422 (e.g. "Le SIREN en entrée n'existe pas ou la date de début d'effet de ligne annuaire est antérieure à la date de début d'effet de ce SIREN")The SIREN is not yet in the PPF Annuaire. This mostly happens with companies created a few days ago. Check your SIREN at facturation.chorus-pro.gouv.fr/annuaire (not in the INSEE directory) and try again.
SIREN already in useAnother active account already has this SIREN. If you think the duplicate account is yours, contact support indicating both accounts.
TVA number already in useSame case, with the TVA number we automatically derive from your SIREN: it must be unique across the entire system. Retrying will not resolve it — contact support to decide which account retains the tax identity.

If the public Annuaire lookup says «Adresse de facturation non active»

Section titled “If the public Annuaire lookup says «Adresse de facturation non active»”

In the public Annuaire lookup (facturation.chorus-pro.gouv.fr/annuaire) you may see «Adresse de facturation non active» or «Plateforme agréée rattachée : Non». Check which tab of your company's record shows the message:

  • Unité légale (SIREN): if you signed the mandate recently, this is normal until the line becomes active: the next day or, if you are coming from another PA, on the effective date. If that time has passed, check the designation status in e-Invoicing and e-Reporting France.
  • Établissements (SIRET): this is normal if your account is published with the SIREN, because establishments do not have their own line. If an establishment must receive invoices at its own address, create an organisational unit with its SIRET.